FrostGuard Plus (Walmart)

Installation Instructions

1. Insert one pole into each side of the pole connector, do this twice.

Screen_Shot_2019-01-16_at_4.19.52_PM.png

2. Lift up the fastener and rod pocket, gently slide the poles into the sleeve. Repeat on the opposite side. The poles should now be completely enclosed in fabric.

Screen_Shot_2019-01-16_at_4.20.13_PM.png

3. IMPORTANT, the pole should not be visible when correctly installed. 

Screen_Shot_2019-01-16_at_4.20.25_PM.png

4. Open drivers side door and make sure the security panel is hanging inside the door frame, past the door jam. Close the driver's side door, making sure the security panel stays in place.

Screen_Shot_2019-01-16_at_4.20.53_PM.png

5. Make sure the security panel is hanging inside the door frame, past the door jam. Close the door, making sure the security panel stays in place.

Screen_Shot_2019-01-16_at_4.21.00_PM.png

6. Open other door and make sure the security panel is hanging inside the door frame, past the door jam. Close the other door, making sure the security panel stays in place.

Screen_Shot_2019-01-16_at_4.21.05_PM.png